Flow rate: 25 l/min.
Note: With Tri-Clamp connection on the discharge nozzle
Description:
The B70H is a modification of our B70V and is designed for horizontal use on a transport trolley. It can be used in situations where the B70V comes up against spatial or handling limits and thus rounds off our Eccentric screw pumps range with a mobile variant. The pump is suitable for pumping aqueous to highly viscous Newtonian and non- Newtonian media as well as media containing solids and shear-sensitive media. It is also used in explosion-proof zones for aggressive and highly flammable liquids with high delivery pressure.
- also available in explosion-proof design on request
- Horizontal version
- with stainless steel transport trolley
Features & Advantages
- Conveying possible at low room height
- No physical strain due to heavy lifting
- Mobility is given by the transport trolley
- Simple size change possible
- Easy handling of pumps with large weights
Station de pompage (matériel): | Edelstahl (1.4571/1.4404) |
Joint statique (matériau): | FPM (caoutchouc fluoré) |
Garniture mécanique (matériau): | Kohle, CrMO-Guss, FPM |
Arbre d'entraînement (matériel): | Edelstahl (1.4571) |
Stator (Werkstoff): | PTFE (Polytetrafluorethylen) |
Rotor (Werkstoff): | Edelstahl (1.4571) |
Débit (jusqu'à l/min): | 25 |
Tête de refoulement (jusqu'à bar max.)*: | 8 |
Température du fluide (max °C): | 140 |
Viscosité (jusqu'à mPas): | 100000 |
Forme de la roue du convoyeur: | Gelenkwelle (hochviskose Medien) |
Type de joint: | Mechanical seal (MS) |
Profondeur d'immersion (mm): | 400 |
Statorgröße: | 25.1 |
Druckstutzen (DN): | 50 |
Capacité (kW): | 1,5 |
degré de protection: | IP55 |
Vitesse (1/min): | 900 |
Typ: | B70H |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler