PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ FRANCE S.A.S. | France
Entreprise familiale depuis 1954
+33 1 79973710
Pump tube PP for mixing and pumping

Pump tube PP for mixing and pumping

for low viscosity lyes

Dichtungen:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0110-350
  • upon request
  • not suitable for flammable liquids
Description: The Drum pump is suitable for corrosive, aqueous to slightly viscous... mehr
Produktinformationen zu "Pump tube PP for mixing and pumping"

Immersion depth: 1000 mm
Type of seal : sealless (DL)


Description:

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original handwheel
  • Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Two functions (pumping and mixing) in one unit
  • No leakage in case of inclined position or moving of the pumping unit
  • High mixing and conveying capacity for thorough homogenization
  • Switching between the pumping and mixing functions takes place without disturbing the ongoing operation, which is made possible by a small lever on the handwheel
Caractéristiques techniques
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Station de pompage (matériel): PP (polypropylène)
Roue (matériau): PP (polypropylène)
Joint statique (matériau): pas de joints en contact avec le fluide
Garniture mécanique (matériau): pas de joints en contact avec le fluide
Roulement (matériau): ETFE / PTFE
Arbre d'entraînement (matériel): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Débit (jusqu'à l/min): 95
Hauteur de refoulement (jusqu'à mWS): 25
Température du fluide (max °C): 50
Densité (jusqu'à kg/dm³): 1.9
Viscosité (jusqu'à mPas): 800
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Forme de la roue du convoyeur: Roue (roue radiale)
Type de joint: Sans joint (DL)
Profondeur d'immersion (mm): from 1000 mm
Diamètre du tube plongeur (max. mm): 50
Fils conducteurs: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Typ: MP PP 50/41-L DL SS

* Le débit maximal est une valeur déterminée au moyen d'un banc d'essai et mesurée avec de l'eau à une température moyenne d'environ 20°C. La mesure est effectuée au niveau du tubulure de refoulement de la pompe, sans flexible, ni pistolet ni débitmètre. Le débit de refoulement réalisable en service est plus faible et dépend de l'application individuelle, des propriétés du fluide ainsi que de la configuration de la pompe. La hauteur de refoulement maximale dépend également de la conception de la pompe, du moteur et du fluide. Les valeurs de viscosité sont déterminées avec de l'huile.

** Méthode de test: Fluide eau / diesel, débit dans le sens préférentiel, tronçon de stabilisation de 0,2 m avant et après le débitmètre

HC Wave
Impeller
Stainless steel shaft
Rotor
HC Wave
Rotor
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

  info@lutz-pumpen.de
  bewerbung@lutz-pumpen.de