PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ FRANCE S.A.S. | France
Entreprise familiale depuis 1954
+33 1 79973710
Eccentric screw pump tube B70V-D Industry

Eccentric screw pump tube B70V-D Industry

for three-phase motors up to 400 Volt

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0173-004
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful... mehr
Produktinformationen zu "Eccentric screw pump tube B70V-D Industry"

Flow rate: 12 l/min .
Drive shaft: cardan shaft (GW)
Seal type: stop bushing 
Note: Optionally, stator size 25.2 (0173-254) can also be selected in order to be able to overcome greater delivery heights


Description:

The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
  • Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product conveying
  • Low wear
  • Ideal for mobile use
Caractéristiques techniques
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Station de pompage (matériel): Edelstahl (1.4571/1.4404)
Joint statique (matériau): FPM (caoutchouc fluoré)
Arbre d'entraînement (matériel): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Rotor (Werkstoff): Edelstahl (1.4571)
Stopfbuchse (Werkstoff): PTFE (Polytetrafluorethylen)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Débit (jusqu'à l/min): 12
Tête de refoulement (jusqu'à bar max.)*: 6
Température du fluide (max °C): 140
Viscosité (jusqu'à mPas): 30000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Forme de la roue du convoyeur: Gelenkwelle (hochviskose Medien)
Type de joint: Stopfbuchse
Profondeur d'immersion (mm): from 1000 mm
Diamètre du tube plongeur (max. mm): 54
Statorgröße: 12.1
Fils conducteurs: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type de moteur: Courant triphasé
Typ: B70V-D

* Le débit maximal est une valeur déterminée au moyen d'un banc d'essai et mesurée avec de l'eau à une température moyenne d'environ 20°C. La mesure est effectuée au niveau du tubulure de refoulement de la pompe, sans flexible, ni pistolet ni débitmètre. Le débit de refoulement réalisable en service est plus faible et dépend de l'application individuelle, des propriétés du fluide ainsi que de la configuration de la pompe. La hauteur de refoulement maximale dépend également de la conception de la pompe, du moteur et du fluide. Les valeurs de viscosité sont déterminées avec de l'huile.

** Méthode de test: Fluide eau / diesel, débit dans le sens préférentiel, tronçon de stabilisation de 0,2 m avant et après le débitmètre

Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

  info@lutz-pumpen.de
  bewerbung@lutz-pumpen.de